Machine Features
Energy-efficient: highly optimized servo energy-saving technology, more effective, lower unit energy consumption
Excellent molding stability: servo driving system, close-cycle control. Compared with traditional machines, its molding repeatability is highly improved.
High sensitivity: sensitive servo driving system, quick start 0.05s.
Environmental protection: run with low noise, slow running is quiet.
Reliable pressure maintaining: pressure maintaining time can be regulated more widely. The function is more stable.
constant oil temperature: servo motor exports hydraulic oil in proportion to avoid extra heat. The hydraulic oil does not need to cool down, which saves water sharply.
Technical Parameters
INJECTION | UNIT | A | B | A | B | C |
Screw Diameter | mm | 22 | 26 | 26 | 30 | 34 |
Screw L/D Ratio | L/D | 24 | 20.3 | 24.2 | 21 | 19.5 |
Shot Size(Theoretical) | cm3 | 38 | 53 | 66 | 88 | 113 |
Injection Weight (PS) | g | 35 | 48 | 60 | 80 | 103 |
Injection Rate | g/s | 47 | 65 | 60 | 80 | 103 |
Injection Pressure | Mpa | 266 | 191 | 236 | 177 | 138 |
Plasticizing Capacity(ps) | g/s | 4.6 | 6.3 | 6.3 | 8.4 | 10.3 |
Screw Speed | rpm | 0-260 | 0-260 | |||
CLAMPING |
| |||||
Clamp Tonnage | KN | 600 | 600 | |||
Toggle Stroke | mm | 270 | 270 | |||
Space Between Tie Bars | mm | 310×310 | 310×310 | |||
Max. Mold Height | mm | 330 | 330 | |||
Min. Mold Height | mm | 120 | 120 | |||
Ejector Stroke | mm | 70 | 70 | |||
Ejector Tonnage | KN | 22 | 22 | |||
Ejector Number | PC | 1 | 1 | |||
OTHERS |
| |||||
Max. Pump Pressure | Mpa | 16 | 16 | |||
Pump Motor Power | Kw | 7.5 | 7.5 | |||
Heater Power | Kw | 4.55 | 5.1 | |||
Machine Dimension(L×W×H) | m | 3.55X1.13X1.76 | 3.62X1.13X1.76 | |||
Machine Weight | t | 2.3 | 2.5 | |||
Hopper Capacity | Kg | 25 | 25 | |||
Oil Tank Capacity | L | 180 | 180 | |||
